© Copyright Red Lodge Helicopters 2024
‘....>
.
The first sub assembly of parts C, K, M and N can be glued together on the bench before fitting and glueing into the fuselage.
Once the woodwork is aligned I used an old
6 volt battery to hold everything in place
whilst the glue sets.
I actually cut off the “rib” parts from the bulkheads K and L as I wanted to alter these for mounting the
mechanics. This will depend on what time of mechanics your fitting.
Woodwork
Parts G & H held in place with a piece of wood
while the glue dries.
Fitting the cockpit floor and strengthening
plates for the flight batteries and mounting
point for the receiver switch.
